Assignment 1: LensCrafters Case Study Due Week 4 and worth 250 points This assignment requires students complete an analysis of the LensCrafters case from Chapter 6 of the text. Write a six to seven (6-7) page paper in which you:
Your assignment must follow these formatting requirements:
The specific course learning outcomes associated with this assignment are:
Click here to view the grading rubric for this assignment.
CASE STUDY INFO BELOW:
to illustrate how goods and services are designed in an integrated fashion, we will study LensCrafters—a well-known provider of eyeglasses produced “in about an hour.” We use the framework for goods and service design shown in Exhibit 6.1.
LensCrafters (www.lenscrafters.com) is an optical chain of about 860 special service shops with on-site eyeglass production capabilities in the United States, Canada, and Puerto Rico. All resources necessary to create and deliver “one-stop-shopping” and eyeglasses “in about an hour” are available in each store.LensCrafters’ mission statement is focused on being the best by
Our perception of the LensCrafters customer benefit package is the integrated set of goods and services depicted in Exhibit 6.11. The primary good (eyewear) and the primary service (accurate eye exam and one-hour service) are of equal importance. Peripheral goods and services encircle the primary ones to create “a total LensCrafters’ experience.”
The manufacturing process is integrated into the service facility to provide rapid order response, yet not sacrifice quality. In this industry, it is unusual for customers to watch their eyeglasses being made and this “service experience” is viewed as adding value. The equipment used in the labs is the most technologically advanced equipment in the industry. The eyewear is manufactured to specifications in a clean, modern, and professionally run facility.Other issues that LensCrafters would need to consider in designing its manufacturing processes are the following:
The service-delivery system, as evidenced by the location and layout, servicescape, service processes, job designs, technology, and organizational structure, is combined into an integrated service-delivery system. LensCrafters’ stores are located in high-traffic areas such as shopping centers and malls within 5 to 10 miles of the target market.A typical store layout is shown in Exhibit 6.12. The servicescape is designed to convey an impression of quality and professionalism. The store is spacious, open, clean, carpeted, with professional merchandise display areas, modern furniture in the retail area, and modern equipment in the laboratory, technicians in white lab coats, shiny machines in the lab, and bright lights throughout. The store display cases, eye examination areas, and fitting stations are in the high-contact area where customers and service providers interact frequently. Optometry degrees, certifications, and licenses hanging on the wall provide physical evidence of employees’ abilities.A greeter directs each customer to the appropriate service area as he or she enters the store. The low contact area of a LensCrafters store—the optical laboratory—is separated from the retail area by large glass panels. The optical laboratory becomes a “showroom” where the customer’s perception of the total delivery process is established.The store is a service factory. The typical service process begins when a customer makes an appointment with an optician and continues until the eyeglasses are received and paid for. Between these two events, the customer travels to the store, parks, receives a greeting from store employees, obtains an eye examination, selects frames, is measured for proper eyeglasses and frame fit, watches the eyeglasses being made in the laboratory, and receives a final fitting to make sure all is well. Information flow in the forms of prescriptions, bills, and receipts complements the physical flows of people and eyewear.
Each job at LensCrafters—sales associate, lab technician, and doctor of optometry—requires both technical skills and service management skills. Associates are well trained, friendly, and knowledgeable about their jobs. The lab technicians are certified in all work tasks and processes. Many associates are cross-trained.At the service-encounter level, key issues that managers need to consider include the following:
LensCrafters reinforces its customer benefit package with a comprehensive 30-day unconditional service guarantee design defined as follows:You buy a pair of glasses at LensCrafters and then you think, ‘Maybe red’s not my color.’ Or, you question, ‘Wow, should I have gotten the antireflective coating?’ Or after wearing them for a while you realize, ‘These really aren’t going to be comfortable enough to wear every day.’Whatever your reason, if you don’t completely love your eyeglasses or prescription sunglasses, you can exchange or return them for a full refund at LensCrafters—no excuses, no explanations. That’s what our 30-Day Unconditional Guarantee is all about—giving you peace of mind with every pair.So how does it work? Simple. Just return your eyeglasses—in their original condition—to LensCrafters within 30 days. We’ll exchange them for a new pair or refund your money. Why do we do it? Because LensCrafters stands behind each and every pair of our glasses. And we want to make sure you simply love them.What does ‘Unconditional’ really mean? The 30 days begins on the date you actually receive your eyeglasses.You can return or exchange your new eyewear as many times as needed within the 30-day time period. However, the 30 days does not start over with each return or exchange.If you exchange your purchase for a pair at a lower price, we’ll refund the price difference.If you exchange your purchase for a pair at a higher price, you’ll only pay the price difference.If your eyeglasses get broken, you can use our 1-Year Replacement Discount.22
Although the company has been around for some time, it undoubtedly faces challenges in replicating its design concept in new locations. On a continuing basis, as technology and procedures change, LensCrafters will have to develop processes to introduce changes into all existing locations to maintain operational consistency and achieve its strategic objectives. For example, how might it react as competitors such as Walmart enter the optical industry?As you see, LensCrafters, manufacturing and service design depends on a variety of operations management concepts, all of which are integrated and support a rather complex customer benefit package.
1.How might today’s technology, such as the Internet, be used to understand the voice of the customer?2.What lessons can be learned from the LaRosa’s Pizzeria boxed example?3.In building a House of Quality, what departments or functions should be involved in each step of the process?4.Explain how the goal-post view of conforming to specifications differs from Taguchi’s loss function. Would you rather buy an automobile where suppliers used the goal-post or Taguchi models? Why?5.Propose an explicit service guarantee for an airline. Clearly explain why you included the features of your service guarantee (maximum of one page). Do you think that an airline would adopt it? Why or why not?
Note: an asterisk denotes problems for which an Excel spreadsheet template in the Premium Online Content may be used.1.Build a House of Quality (showing only the voice of the customer, technical features, interrelationships, and relationship matrix from Exhibit 6.2) for designing and producing chocolate chip cookies. The voice of the customer consists of:a.Softb.Freshc.Bittersweetd.Not burnede.Large sizef.Moderate priceg.Lots of chocolateThe technical features identified are:a.Baking temperatureb.Baking timec.Type of chocolated.Proportion of chocolatee.Sizef.Shapeg.Thicknessh.Batch sizei.Amount of preservativesClearly explain your reasoning for your ratings of the interrelationships and relationship matrix. Can you think of other technical features that should be included to better address the voice of the customer?2.*Suppose that the specifications for a part (in inches) are 6.00 ± 0.05, and that the Taguchi loss function is estimated to be L(x) = 6,500 (x – T)2. Determine the economic loss if x = 6.07 inches.3.*A quality characteristic has a design specification (in cm.) of 0.200 ± 0.020. If the actual process value of the quality characteristic exceeds the target by 0.020 on either side, the product will require a repair of $50. Find the value of k and state the Taguchi loss function. What is the economic loss associated with x = 0.015?4.*For the situation in problem 3, what are the economic design specifications if the cost of inspection and adjustment is $7.50?5.*Suppose that the design specifications for a hydraulic cylinder are 10.00 ± 0.10 centimeters, and that the Taguchi loss function is estimated to be L(x) = 2,400 (x – T)2.a.Determine the estimated loss for a production order if the quality characteristic under study takes on a value of 10.04 and 100 parts are produced.b.Assume the production process is recalibrated weekly and a new sample of cylinders after recalibration reveals an x-bar of 9.789. What action, if any, is need in this situation? Explain.6.The service center for a brokerage company provides three functions to callers: account status, order confirmations, and stock quotes. The reliability was measured for each of these services over one month with these results: 90 percent, 70 percent and 80 percent, respectively. What is the overall reliability of the call center?7.Two cooling fans are installed in some laptop computers. Suppose the reliability of each cooling fan is 0.99. What percent improvement in reliability does adding the second fan provide?8.Given the following diagram, determine the total system reliability if the individual component reliabilities are: A = 0.98, B = 0.92, and C = 0.85. (Hint: Use Equations 6.2 and 6.3 and note that the reliabilities of the parallel components are different.)
9.A simple electronic assembly consists of two components in a series configuration with reliabilities as shown in the figure below.
Engineers would like to increase the reliability by adding additional components in one of the two proposed designs shown in the figure on the next page (notice the difference in the diagram design with respect to being in series and parallel):
a.Find the reliability of the original design.b.Explain how the configurations of the proposed designs differ.c.Which proposed design has the best reliability?10.Research and write a short paper (maximum two typed pages) illustrating an example of how a company applies concepts of Design for Environment (DfE).11.Choose a servicescape for a business with which you are familiar and list key physical attributes of the servicescape using the three subdimensions, and discuss their impact on customer service and value. Explain how the servicescape establishes the behavioral setting for your example.12.Select a service at your school, such as financial aid, bookstore, curriculum advising, and so on. Propose a redesign of this service and its service-delivery system. First, baseline the current service and system, and then suggest how to redesign and improve it. Make use of chapter ideas as best you can.13.Identify a job in an organization and describe how the four elements of service-encounter design are designed and managed for this job. (The job you select could be in a professional organization such as a dentist or tax advisor, or in a routine service organization such as a hotel check-in desk clerk or airline flight attendant.)14.When Walt Disney created the Disney empire in the 1950s, he forbid its star characters such as Mickey Mouse and Pluto to talk. Mr. Disney thought it would be too difficult to control the service encounters between customers and Disney characters, and it would ruin the ‘magic’ of Disney. Therefore, Disney characters were trained to gesture and use only their body language to interact and entertain guests. Today, Disney is experimenting with talking characters. What are some advantages and disadvantages of talking Disney characters from a service design perspective? Research the current status of this Disney design decision and include a brief summary in your write-up (no more than two typed pages).15.Identify a service-provider job and associated service encounters and design and write a job description for it. (Consider desired customercontact skills and behaviors, education and training requirements, empowerment capabilities, hiring criteria, and so on.)
Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.
You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.Read more
Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.Read more
Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.Read more
Your email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.Read more
By sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.Read more